"Lung Barometric Measurements in Normal And in Respiratory Distressed Lungs"

Little is known about how lung mechanics are affected during the very early phase after starting mechanical ventilation. Since the conventional method of measuring esophageal pressure is complicated, hard to interpret and expensive, there are no studies on lung mechanics on intensive care patients directly after intubation, during the first hours of ventilator treatment and forward until the ventilator treatment is withdrawn. Published studies have collected data using the standard methods from day 1 to 3 of ventilator treatment for respiratory system mechanics, i.e. the combined mechanics of lung and chest wall. Consequently, information on lung mechanical properties during the first critical hours of ventilator treatment is missing and individualization of ventilator care done on the basis of respiratory system mechanics, which are not representative of lung mechanics on an individual patient basis. We have developed a PEEP-step method based on a change of PEEP up and down in one or two steps, where the change in end-expiratory lung volume ΔEELV) is determined and lung compliance calculated as ΔEELV divided by ΔPEEP (CL = ΔEELV/ΔPEEP). This simple non-invasive method for separating lung and chest wall mechanics provides an opportunity to enhance the knowledge of lung compliance and the transpulmonary pressure. After the two-PEEP-step procedure, the PEEP level where transpulmonary driving pressure is lowest can be calculated for any chosen tidal volume. The aim of the prese…

This description comes directly from the study's public registry record.

Sophie Lindgren, Assoc prof  ·  +46313421000  ·  sophie.lindgren@vgregion.se

Always discuss trial participation with your own doctor first.

Get one email when the public record changes — results posted, or the study's status changes. Nothing else, ever.

We email about this public record only. Unsubscribe anytime with one click. Never medical advice.